joints, reducing the need for de-burring.
Drainage paths are positioned so that drainage slots can be routed for
internally/externally glazed windows without the need to re-set machinery.

3) Co-extruded Gaskets;
Profiles and beads are manufactured with co-extruded gasket,
eradicating the need to roll in gaskets after fabrication. This saves time
& reduces stock holding. With no need for messy lubricants, fabrication
and installation are also cleaner. End users benefit from the elimination
of corner gaps and shrink back.

4) Single Leg ‘knock-in’ Bead;
Elite 63’s ‘knock-in’ beads provide a much cleaner glazing platform
and speed installation for both external and internal glazed windows.
24mm and 28mm beads easily accommodate the variations
in thickness commonly found in glass.

5) Reinforcements;
Both aluminium & steel reinforcements are available & the profiles have
been designed so that reinforcement can be inserted quick and easily.

6) Location Lugs;
Elite 63 has been designed with special location lugs to ensure
reinforcement is held well away from ‘V notch’ welds that might
otherwise impede the insertion of reinforcement.

7) Multi-Chamber Profile;
The multi-chamber Elite 63 anticipates changes to Building Regulations
that will call for greater thermal efficiency. A multi-chamber design
increases thermal insulation by reducing ‘cold bridging’.